Welcome to our company!
EV6610-S-00A 4-55V, 3A Half-Bridge Power Driver Evaluation Board
Share
pMPS EV6610-S-00A — Half-Bridge Power Driver Evaluation Board, 4-55V input, 3 A output./p
- Product Details
- Download
EV6610-S-00A 4-55V, 3A Half-Bridge Power Driver Evaluation Board
The MPS EV6610-S-00A is an evaluation board built around the MP6610GS for bench characterisation of the device in its intended topology. It operates from a 4 V to 55 V input and is rated for 3 A.
The EV6610-S-00A is an evaluation board for the MP6610GS, a half-bridge power driver.
Key Specifications
| Part Number | EV6610-S-00A |
| Board For | MP6610GS |
| Board Type | Evaluation / demonstration board |
| Function | Half-Bridge Power Driver Evaluation Board |
| Input Voltage | 4 V to 55 V |
| Current Rating | 3 A |
| Ordering Codes | EV6610-S-00A |
Features
- Wide 4V to 55V Input Voltage Range
- Up to 3A Output Current
- Internal Current Sense
- 2.5V, 3.3V and 5V Compatible Logic Supply
- Over-Current Protection (OCP), Over- Voltage Protection (OVP), Over- Temperature Protection (OTP)
- Fault Indication Output
Evaluation Board
Design Notes
- The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
- Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
- Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
- Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.
Common Questions
What input voltage does the EV6610-S-00A support?
4 V to 55 V. The rated output is 3 A.
What are the defining features of the EV6610-S-00A?
Wide 4V to 55V Input Voltage Range Up to 3A Output Current
Shenzhen Gaorunxin Technology Co., Ltd
Online message
Shenzhen Gaorunxin Technology Co., Ltd
