EV8124-D-00A 8-14V, 500mA LNB Power Supply and Control Regulator Evaluation Board QFN-14

Product

EV8124-D-00A 8-14V, 500mA LNB Power Supply and Control Regulator Evaluation Board QFN-14

Share

pMPS EV8124-D-00A — LNB Power Supply and Control Regulator Evaluation Board, 8-14V input, 500 mA output, QFN-14./p

[email protected]

MPS QFN-14 Power Management Evaluation Boards

Product Details
Download

EV8124-D-00A 8-14V, 500mA LNB Power Supply and Control Regulator Evaluation Board QFN-14

The MPS EV8124-D-00A is an evaluation board built around the MP8124 for bench characterisation of the device in its intended topology. It operates from a 8 V to 14 V input and is rated for 500 mA. The board carries the device in its QFN-14 package.

EV8124-D-00A Evaluation Board is designed to demonstrate the capability of MP8124.

Key Specifications

Part Number	EV8124-D-00A
Board For	MP8124
Board Type	Evaluation / demonstration board
Function	LNB Power Supply and Control Regulator Evaluation Board
Input Voltage	8 V to 14 V
Current Rating	500 mA
Package	QFN-14
Ordering Codes	EV8124-D-00A

Features

Compatible with DiSEqC 1.x
600mA Accurate Current Limit
8V-to-14V Input Voltage
40V Output Voltage Rating
Low-Noise LDO Output
High Efficiency for Light Load, >85% at 40mA
High Frequency for Small Component Size
Build in 22kHz Signal Shaper
Selectable Output Voltage
OCP, SCP Protection

Evaluation Board

Design Notes

The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.