EV8128-Q-00A 8-14V, 1A LNB Voltage Regulator Evaluation Board QFN-20
EV8128-Q-00A 8-14V, 1A LNB Voltage Regulator Evaluation Board QFN-20

EV8128-Q-00A 8-14V, 1A LNB Voltage Regulator Evaluation Board QFN-20

Share
pMPS EV8128-Q-00A — LNB Voltage Regulator, 8-14V input, 1 A output, QFN-20./p
    • Product Details
    • Download

    EV8128-Q-00A 8-14V, 1A LNB Voltage Regulator Evaluation Board QFN-20

    The MPS EV8128-Q-00A is an evaluation board built around the MP8128 for bench characterisation of the device in its intended topology. It operates from a 8 V to 14 V input, is rated for 1 A and switches at 440 kHz. The board carries the device in its QFN-20 package.

    The EV8128-Q-00A is an evaluation board designed to demonstrate the capabilities of the MP8128, a highly integrated, DiSEqC 1.x and DiSEqC 2.x compatible, low-noise block (LNB) voltage regulator.

    Key Specifications

    Part NumberEV8128-Q-00A
    Board ForMP8128
    Board TypeEvaluation / demonstration board
    FunctionLNB Voltage Regulator
    Input Voltage8 V to 14 V
    Current Rating1 A
    Switching Frequency440 kHz
    InterfaceI²C
    PackageQFN-20
    Ordering CodesEV8128-Q-00A

    Features

    • 8V to 14V Input Voltage (VIN) Range
    • Up to 1A Configurable Current
    • DiSEqC 1.x and DiSEqC 2.x Compatible
    • Integrated I2C Bus
    • Low-Noise LDO Output
    • 440kHz Switching Frequency (fSW)
    • Selectable 22kHz Internal or External Signal Source
    • Selectable LNB Output Voltage
    • Over-Current Protection (OCP), Short- Circuit Protection (SCP), and Overt-Voltage Protection (OVP)
    • Thermal Shutdown

    Evaluation Board

    EV8128-Q-00A evaluation board
    EV8128-Q-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV8128-Q-00A support?
    8 V to 14 V. The rated output is 1 A.
    Which package and ordering codes apply to the EV8128-Q-00A?
    QFN-20; order codes include EV8128-Q-00A.
    What are the defining features of the EV8128-Q-00A?
    8V to 14V Input Voltage (VIN) Range Up to 1A Configurable Current

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products