EV8770-Q-00A 4.5-17V, 8A Step-Down Converter Evaluation Board QFN-16
EV8770-Q-00A 4.5-17V, 8A Step-Down Converter Evaluation Board QFN-16

EV8770-Q-00A 4.5-17V, 8A Step-Down Converter Evaluation Board QFN-16

Share
pMPS EV8770-Q-00A — Step-Down Converter Evaluation Board, 4.5-17V input, 8 A output, QFN-16./p
    • Product Details
    • Download

    EV8770-Q-00A 4.5-17V, 8A Step-Down Converter Evaluation Board QFN-16

    The MPS EV8770-Q-00A is an evaluation board built around the MP8770 for bench characterisation of the device in its intended topology. It operates from a 4.5 V to 17 V input, is rated for 8 A and switches at 700 kHz. The board carries the device in its QFN-16 package.

    The EV8770-Q-00A Evaluation Board is designed to demonstrate the capabilities of MPS' MP8770, a fully-integrated high-frequency, synchronous rectified, step-down, switch-mode converter with internal power MOSFETs.

    Key Specifications

    Part NumberEV8770-Q-00A
    Board ForMP8770
    Board TypeEvaluation / demonstration board
    FunctionStep-Down Converter Evaluation Board
    Input Voltage4.5 V to 17 V
    Current Rating8 A
    Switching Frequency700 kHz
    PackageQFN-16
    Ordering CodesEV8770-Q-00A

    Features

    • Wide 4.5V-to-17V Operating Input Range
    • 22mΩ/10mΩ Low-RDS(ON) Internal Power MOSFETs
    • 100µA Low IQ Current
    • High-Efficiency Synchronous-Mode Operation
    • Pre-biased Startup
    • Fixed 700kHz Switching Frequency
    • External Programmable Soft Startup Time
    • EN and Power Good for Power Sequencing
    • Over-Current Protection and Hiccup
    • Thermal Shutdown

    Evaluation Board

    EV8770-Q-00A evaluation board
    EV8770-Q-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV8770-Q-00A support?
    4.5 V to 17 V. The rated output is 8 A.
    Which package and ordering codes apply to the EV8770-Q-00A?
    QFN-16; order codes include EV8770-Q-00A.
    What are the defining features of the EV8770-Q-00A?
    Wide 4.5V-to-17V Operating Input Range 22mΩ/10mΩ Low-RDS(ON) Internal Power MOSFETs

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products