EV8845-C-02A 2.7-6V, 5A High Efficient Synchronous Step-Down Switcher Evaluation Board WLCSP20
EV8845-C-02A 2.7-6V, 5A High Efficient Synchronous Step-Down Switcher Evaluation Board WLCSP20

EV8845-C-02A 2.7-6V, 5A High Efficient Synchronous Step-Down Switcher Evaluation Board WLCSP20

Share
pMPS EV8845-C-02A — High Efficient Synchronous Step-Down Switcher, 2.7-6V input, 5 A output, WLCSP20./p
    • Product Details
    • Download

    EV8845-C-02A 2.7-6V, 5A High Efficient Synchronous Step-Down Switcher Evaluation Board WLCSP20

    The MPS EV8845-C-02A is an evaluation board built around the MP8845 for bench characterisation of the device in its intended topology. It operates from a 2.7 V to 6 V input and is rated for 5 A. The board carries the device in its WLCSP20 package.

    The EV8845-C-02A is used for demonstrating the performance of MPS's MP8845.

    Key Specifications

    Part NumberEV8845-C-02A
    Board ForMP8845
    Board TypeEvaluation / demonstration board
    FunctionHigh Efficient Synchronous Step-Down Switcher
    Input Voltage2.7 V to 6 V
    Current Rating5 A
    InterfaceI²C
    PackageWLCSP20
    Ordering CodesEV8845-C-02A

    Features

    • Wide 2.7V to 6V Operating Input Range
    • Up to 5A Load Current
    • Internal 28mΩ High-Side, 17mΩ Low-Side Power MOSFETs
    • Fixed Frequency Hysteretic Mode Control
    • I2C Compatible Interface up to 3.4Mbps
    • I2C Programmable Output Range from 0.6V to 1.1V in 3.9mV Steps
    • Factory Adjustable Switching Frequency from 1MHz to 2.2MHz
    • I2C Programmable Voltage Transition Slew Rate
    • Power Saving Mode Selectable via I2C
    • Internal Soft-Start

    Evaluation Board

    EV8845-C-02A evaluation board
    EV8845-C-02A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV8845-C-02A support?
    2.7 V to 6 V. The rated output is 5 A.
    Which package and ordering codes apply to the EV8845-C-02A?
    WLCSP20; order codes include EV8845-C-02A.
    What are the defining features of the EV8845-C-02A?
    Wide 2.7V to 6V Operating Input Range Up to 5A Load Current

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message