EVBL9841-L-00A 3.3-36V, 1A Step-Down Switch-Mode Convertor Evaluation Board

Product

EVBL9841-L-00A 3.3-36V, 1A Step-Down Switch-Mode Convertor Evaluation Board

Share

pMPS EVBL9841-L-00A — Step-Down Switch-Mode Convertor Evaluation Board, 3.3-36V input, 1 A output./p

[email protected]

MPS Step-Down Power Management Evaluation Boards

Product Details
Download

EVBL9841-L-00A 3.3-36V, 1A Step-Down Switch-Mode Convertor Evaluation Board

The MPS EVBL9841-L-00A is an evaluation board built around the MP9841 for bench characterisation of the device in its intended topology. It operates from a 3.3 V to 36 V input and is rated for 1 A.

The EVBL9841-L-00A is an evaluation board designed to demonstrate the capabilities of the MP9841 and the MPQ9841.

Key Specifications

Part Number	EVBL9841-L-00A
Board For	MP9841
Board Type	Evaluation / demonstration board
Function	Step-Down Switch-Mode Convertor Evaluation Board
Input Voltage	3.3 V to 36 V
Current Rating	1 A
Ordering Codes	EVBL9841-L-00A

Features

Wide 3.3V to 36V Operating Input Voltage (VIN) Range
Up to 1A Continuous Output Current (IOUT)
2μA Low Shutdown Current (ISD)
14μA Sleep Mode Quiescent Current (IQ)
125mΩ and 115mΩ Internal Power MOSFETs
Synchronous Mode for High Efficiency
350kHz to 2.5MHz Configurable Switching Frequency (fSW) Selectable In-Phase or 180° Out-of-Phase External SYNC Clock
Power Good (PG) Indication
Configurable Soft-Start Time (tSS)
80ns Minimum On Time

Evaluation Board

Design Notes

The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.