EVM3593-QY-00B 3.5-45V Input 3A Module Step-Down Converter Evaluation Board QFN6
EVM3593-QY-00B 3.5-45V Input 3A Module Step-Down Converter Evaluation Board QFN6

EVM3593-QY-00B 3.5-45V Input 3A Module Step-Down Converter Evaluation Board QFN6

Share
pMPS EVM3593-QY-00B — Input 3A Module Step-Down Converter Evaluation Board, 3.5-45V input, 3 A output, QFN6./p
    • Product Details
    • Download

    EVM3593-QY-00B 3.5-45V Input 3A Module Step-Down Converter Evaluation Board QFN6

    The MPS EVM3593-QY-00B is an evaluation board built around the MPM3593 for bench characterisation of the device in its intended topology. It operates from a 3.5 V to 45 V input and is rated for 3 A. The board carries the device in its QFN6 package.

    The EVM3593-QY-00B Evaluation Board is designed to demonstrate the capabilities of MPS' MPM3593, a step-down regulator module integrated with I2C control interface and a multipage one-time programmable memory.

    Key Specifications

    Part NumberEVM3593-QY-00B
    Board ForMPM3593
    Board TypeEvaluation / demonstration board
    FunctionInput 3A Module Step-Down Converter Evaluation Board
    Input Voltage3.5 V to 45 V
    Current Rating3 A
    InterfaceI²C
    PackageQFN6
    Ordering CodesEVM3593-QY-00B

    Features

    • Continuous Output Current - 3A Continuous Output Current at Vout≤ 5V - 2A Continuous Output Current at Vout>5V
    • Wide 3.5V to 45V Operation Input Range
    • High Efficiency Synchronous Mode Module
    • Power Good and Fault Indications
    • OVP, OCP and OTP
    • Internal Soft-Start
    • Programmable Address by Resistor
    • Programmability via I2C Interface
    • Multipage One-Time Programmable Memory for Permanent storage
    • Available in 41-pin QFN6x8mm Package

    Evaluation Board

    EVM3593-QY-00B evaluation board
    EVM3593-QY-00B evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EVM3593-QY-00B support?
    3.5 V to 45 V. The rated output is 3 A.
    Which package and ordering codes apply to the EVM3593-QY-00B?
    QFN6; order codes include EVM3593-QY-00B.
    What are the defining features of the EVM3593-QY-00B?
    Continuous Output Current - 3A Continuous Output Current at Vout≤ 5V - 2A Continuous Output Current at Vout>5V Wide 3.5V to 45V Operation Input Range

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products