EVM3632C-QV-00B 4-18V Input 3A Module Step-Down Converter Evaluation Board QFN-20
EVM3632C-QV-00B 4-18V Input 3A Module Step-Down Converter Evaluation Board QFN-20

EVM3632C-QV-00B 4-18V Input 3A Module Step-Down Converter Evaluation Board QFN-20

Share
pMPS EVM3632C-QV-00B — Input 3A Module Step-Down Converter Evaluation Board, 4-18V input, 3 A output, QFN-20./p
    • Product Details
    • Download

    EVM3632C-QV-00B 4-18V Input 3A Module Step-Down Converter Evaluation Board QFN-20

    The MPS EVM3632C-QV-00B is an evaluation board built around the MPM3632C for bench characterisation of the device in its intended topology. It operates from a 4 V to 18 V input, is rated for 3 A and switches at 3 MHz. The board carries the device in its QFN-20 package.

    The EVM3632C-QV-00B Evaluation Board is designed to demonstrate the capabilities of MPS' MPM3632C, a step-down regulator module integrated with a synchronous, rectifying power MOSFET, inductor, and three capacitors.

    Key Specifications

    Part NumberEVM3632C-QV-00B
    Board ForMPM3632C
    Board TypeEvaluation / demonstration board
    FunctionInput 3A Module Step-Down Converter Evaluation Board
    Input Voltage4 V to 18 V
    Current Rating3 A
    Switching Frequency3 MHz
    PackageQFN-20
    Ordering CodesEVM3632C-QV-00B

    Features

    • Complete Switch-Mode Power Supply
    • 3MHz Switching Frequency
    • Wide 4V to 18V Operation Input Range
    • Output Adjustable from 0.8V
    • Internal Fixed Soft-Start Time
    • 3A Continuous Output Current
    • Forced CCM for Low Output Ripple
    • Power Good Indicator (PG)
    • Hiccup Over-Current Protection (OCP)
    • Output Over-Voltage Protection (OVP)

    Evaluation Board

    EVM3632C-QV-00B evaluation board
    EVM3632C-QV-00B evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EVM3632C-QV-00B support?
    4 V to 18 V. The rated output is 3 A.
    Which package and ordering codes apply to the EVM3632C-QV-00B?
    QFN-20; order codes include EVM3632C-QV-00B.
    What are the defining features of the EVM3632C-QV-00B?
    Complete Switch-Mode Power Supply 3MHz Switching Frequency

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products