EVM3650C-QW-00A 2.75-17V, 6A Step-Down Power Module Evaluation Board QFN-24

EVM3650C-QW-00A 2.75-17V, 6A Step-Down Power Module Evaluation Board QFN-24

The EVM3650C-QW-00A is an evaluation board designed to demonstrate the capabilities of the MPM3650C, a fully integrated, high-frequency, synchronous, rectified, step-down power module with an internal inductor.

Key Specifications

Features

• Wide 2.75V to 17V Operating Input Voltage (VIN) Range
• Output Current (IOUT) for Different Output Voltage (VOUT) Ranges: o 6A IOUT for 0.6V to 1.8V VOUT o 5A IOUT for 1.8V to 3.3V VOUT
• 3.3V Maximum VOUT
• Forced Continuous Conduction Mode (CCM) for Low Output Voltage Ripple
• High-Efficiency Synchronous Operation
• Supports Pre-Biased Start-Up
• Fixed 1200kHz Switching Frequency (fSW)
• Externally Configurable Soft-Start Time (tSS)
• Enable (EN) and Power Good (PG) for Power Sequencing
• Over-Current Protection (OVP) with Hiccup Mode

Design Notes

• The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
• Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
• Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
• Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

Common Questions