EVQ4415A-QB-00A 4-36V, 1.5A Step Down Convertor Evaluation Board QFN-13
EVQ4415A-QB-00A 4-36V, 1.5A Step Down Convertor Evaluation Board QFN-13

EVQ4415A-QB-00A 4-36V, 1.5A Step Down Convertor Evaluation Board QFN-13

Share
pMPS EVQ4415A-QB-00A — Step Down Convertor Evaluation Board, 4-36V input, 1.5 A output, QFN-13./p
    • Product Details
    • Download

    EVQ4415A-QB-00A 4-36V, 1.5A Step Down Convertor Evaluation Board QFN-13

    The MPS EVQ4415A-QB-00A is an evaluation board built around the MPQ4415AGQB for bench characterisation of the device in its intended topology. It operates from a 4 V to 36 V input, is rated for 1.5 A and switches at 2.2 MHz. The board carries the device in its QFN-13 package.

    The EVQ4415A-QB-00A is an evaluation board for the MP/MPQ4415AGQB.

    Key Specifications

    Part NumberEVQ4415A-QB-00A
    Board ForMPQ4415AGQB
    Board TypeEvaluation / demonstration board
    FunctionStep Down Convertor Evaluation Board
    Input Voltage4 V to 36 V
    Current Rating1.5 A
    Switching Frequency2.2 MHz
    PackageQFN-13
    Ordering CodesEVQ4415A-QB-00A

    Features

    • Wide 4V to 36V Operating Input Range
    • 1.5A Continuous Load Current
    • 90mΩ High-Side, 50mΩ Low-Side Internal Power MOSFETs
    • High-Efficiency Synchronous Mode Operation
    • Default 2.2MHz Switching Frequency
    • 450kHz to 2.2MHz Frequency Sync
    • Forced Continuous Conduction Mode (CCM)
    • Internal Soft Start (SS)
    • Power Good (PG) Indicator
    • Over-Current Protection (OCP) with Valley- Current Detection and Hiccup

    Evaluation Board

    EVQ4415A-QB-00A evaluation board
    EVQ4415A-QB-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EVQ4415A-QB-00A support?
    4 V to 36 V. The rated output is 1.5 A.
    Which package and ordering codes apply to the EVQ4415A-QB-00A?
    QFN-13; order codes include EVQ4415A-QB-00A.
    What are the defining features of the EVQ4415A-QB-00A?
    Wide 4V to 36V Operating Input Range 1.5A Continuous Load Current

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products