EVQ4431-L-00A 3.3-36V, 1A Synchronous Step-Down Converter Evaluation Board QFN-16
EVQ4431-L-00A 3.3-36V, 1A Synchronous Step-Down Converter Evaluation Board QFN-16

EVQ4431-L-00A 3.3-36V, 1A Synchronous Step-Down Converter Evaluation Board QFN-16

Share
pMPS EVQ4431-L-00A — Synchronous Step-Down Converter Evaluation Board, 3.3-36V input, 1 A output, QFN-16./p
    • Product Details
    • Download

    EVQ4431-L-00A 3.3-36V, 1A Synchronous Step-Down Converter Evaluation Board QFN-16

    The MPS EVQ4431-L-00A is an evaluation board built around the MP4431 for bench characterisation of the device in its intended topology. It operates from a 3.3 V to 36 V input, is rated for 1 A and switches at 450 kHz. The board carries the device in its QFN-16 package.

    The EVQ4431-L-00A evaluation board is designed to demonstrate the capabilities of the MP4431 and the MPQ4431.

    Key Specifications

    Part NumberEVQ4431-L-00A
    Board ForMP4431
    Board TypeEvaluation / demonstration board
    FunctionSynchronous Step-Down Converter Evaluation Board
    Input Voltage3.3 V to 36 V
    Current Rating1 A
    Switching Frequency450 kHz
    PackageQFN-16
    Ordering CodesEVQ4431-L-00A

    Features

    • Wide 3.3V to 36V Operating Input Voltage Range
    • 1A of Continuous Output Current
    • 1μA Low Shutdown Mode Current
    • 10μA Sleep Mode Quiescent Current
    • Internal 90mΩ High-Side and 80mΩ Low- Side MOSFETs
    • 350kHz to 2.5MHz Configurable Switching Frequency
    • Synchronize to External Clock, Selectable In-Phase or 180° Out-of-Phase
    • Power Good Indicator
    • Configurable Soft-Start Time
    • 80ns Minimum On Time

    Evaluation Board

    EVQ4431-L-00A evaluation board
    EVQ4431-L-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EVQ4431-L-00A support?
    3.3 V to 36 V. The rated output is 1 A.
    Which package and ordering codes apply to the EVQ4431-L-00A?
    QFN-16; order codes include EVQ4431-L-00A.
    What are the defining features of the EVQ4431-L-00A?
    Wide 3.3V to 36V Operating Input Voltage Range 1A of Continuous Output Current

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products