EVQ4433-L-00A 5-36V, 3A Low Quiescent Current Synchronous Step-Down Convertor Evaluation Board QFN-16
EVQ4433-L-00A 5-36V, 3A Low Quiescent Current Synchronous Step-Down Convertor Evaluation Board QFN-16

EVQ4433-L-00A 5-36V, 3A Low Quiescent Current Synchronous Step-Down Convertor Evaluation Board QFN-16

Share
pMPS EVQ4433-L-00A — Low Quiescent Current Synchronous Step-Down Convertor Evaluation Board, 5-36V input, 3 A output, QFN-16./p
    • Product Details
    • Download

    EVQ4433-L-00A 5-36V, 3A Low Quiescent Current Synchronous Step-Down Convertor Evaluation Board QFN-16

    The MPS EVQ4433-L-00A is an evaluation board built around the MPQ4433 for bench characterisation of the device in its intended topology. It operates from a 5 V to 36 V input and is rated for 3 A. The board carries the device in its QFN-16 package.

    The EVQ4433-L-00A Evaluation Board is designed to demonstrate the capabilities of MPS' MP/MPQ4433.

    Key Specifications

    Part NumberEVQ4433-L-00A
    Board ForMPQ4433
    Board TypeEvaluation / demonstration board
    FunctionLow Quiescent Current Synchronous Step-Down Convertor Evaluation Board
    Input Voltage5 V to 36 V
    Current Rating3 A
    PackageQFN-16
    Ordering CodesEVQ4433-L-00A

    Features

    • Wide 5V to 36V Operating Input Range 3A Continuous Output Current
    • 1μA Low Shutdown Mode Current
    • 10μA Sleep Mode Quiescent Current
    • Internal 90mΩ High-Side and 40mΩ Low- Side MOSFETs
    • 350kHz to 2.5MHz Programmable Switching Frequency
    • Synchronize to External Clock Selectable In-Phase or 180° Out-of-Phase
    • Power Good Indicator
    • Programmable Soft-Start Time
    • 80ns Minimum On Time
    • Selectable Forced CCM and AAM

    Evaluation Board

    EVQ4433-L-00A evaluation board
    EVQ4433-L-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EVQ4433-L-00A support?
    5 V to 36 V. The rated output is 3 A.
    Which package and ordering codes apply to the EVQ4433-L-00A?
    QFN-16; order codes include EVQ4433-L-00A.
    What are the defining features of the EVQ4433-L-00A?
    Wide 5V to 36V Operating Input Range 3A Continuous Output Current 1μA Low Shutdown Mode Current

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products