EVQ5072-G-00A 3-5.5V, 1A Low RDS(ON) Load Switch Evaluation Board QFN-12

Product

EVQ5072-G-00A 3-5.5V, 1A Low RDS(ON) Load Switch Evaluation Board QFN-12

Share

pMPS EVQ5072-G-00A — Low RDS(ON) Load Switch, 3-5.5V input, 1 A output, QFN-12, AEC-Q100./p

[email protected]

Automotive AEC-Q100 MPS QFN-12 Power Management Evaluation Boards

Product Details
Download

EVQ5072-G-00A 3-5.5V, 1A Low RDS(ON) Load Switch Evaluation Board QFN-12

The MPS EVQ5072-G-00A is an evaluation board built around the MPQ5072 for bench characterisation of the device in its intended topology. It operates from a 3 V to 5.5 V input and is rated for 1 A. The board carries the device in its QFN-12 package.

The EVQ5072-G-00A is an evaluation board designed to demonstrate the capabilities of the MPQ5072, a low RDS(ON) load switch with configurable current limiting.

Key Specifications

Part Number	EVQ5072-G-00A
Board For	MPQ5072
Board Type	Evaluation / demonstration board
Function	Low RDS(ON) Load Switch
Input Voltage	3 V to 5.5 V
Current Rating	1 A
Package	QFN-12
Qualification	AEC-Q100
Ordering Codes	EVQ5072-G-00A

Features

Wide 0.5V to 5.5V Operating Input Range
Integrated 50mΩ Low RDS(ON) MOSFETs
Configurable Start-Up Slew Rate
2.5A Configurable Current Limit
<1µA Shutdown Current
Power Good (PG) Indicator
Output Discharge Function
Enable (EN) Pin
<200ns Short-Circuit Protection (SCP) Response Time
Thermal Shutdown (TSD)

Evaluation Board

Design Notes

The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.