Welcome to our company!
EVQ7200-L-00A 6-42V, 3A Buck Mode LED Driver Evaluation Board QFN-19
Share
pMPS EVQ7200-L-00A — Buck Mode LED Driver Evaluation Board, 6-42V input, 3 A output, QFN-19, AEC-Q100./p
- Product Details
- Download
EVQ7200-L-00A 6-42V, 3A Buck Mode LED Driver Evaluation Board QFN-19
The MPS EVQ7200-L-00A is an evaluation board built around the MPQ7200-AEC1 for bench characterisation of the device in its intended topology. It operates from a 6 V to 42 V input, is rated for 3 A and switches at 2.3 MHz. The board carries the device in its QFN-19 package.
The EVQ7200-L-00A is an evaluation board for the MPQ7200-AEC1, a high-frequency, constant-current LED driver with integrated power MOSFETs.
Key Specifications
| Part Number | EVQ7200-L-00A |
| Board For | MPQ7200-AEC1 |
| Board Type | Evaluation / demonstration board |
| Function | Buck Mode LED Driver Evaluation Board |
| Input Voltage | 6 V to 42 V |
| Current Rating | 3 A |
| Switching Frequency | 2.3 MHz |
| Interface | PWM |
| Package | QFN-19 |
| Qualification | AEC-Q100 |
| Ordering Codes | EVQ7200-L-00A |
Features
- Wide 6V to 42V Operating Input Range
- Configurable 3A Maximum Continuous Output Current in Buck Mode
- 44mΩ/40mΩ Internal Power MOSFETs
- Default 2.3MHz Switching Frequency for Buck Mode with Spread Spectrum
- 100Hz to 2kHz Dimming Frequency for Pulse-Width Modulation (PWM) Dimming
- 500Hz Internal 2-Step Dimming with Programmable Duty Cycle
- Fault Indication for LED Short, LED Open, Output Over-Voltage, and Thermal Shutdown
- Over-Current Protection (OCP) with Latch- Off
- Programmable Thermal Derating via Negative Temperature Coefficient (NTC) Remote Temperature Sensing
- EMI Reduction Technique
Evaluation Board
Design Notes
- The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
- Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
- Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
- Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.
Common Questions
What input voltage does the EVQ7200-L-00A support?
6 V to 42 V. The rated output is 3 A.
Which package and ordering codes apply to the EVQ7200-L-00A?
QFN-19; order codes include EVQ7200-L-00A.
What are the defining features of the EVQ7200-L-00A?
Wide 6V to 42V Operating Input Range Configurable 3A Maximum Continuous Output Current in Buck Mode
Is the EVQ7200-L-00A qualified for automotive designs?
Yes — it is AEC-Q100 qualified. Confirm the grade against the qualification summary in the datasheet before specifying it on a safety-related rail.
Shenzhen Gaorunxin Technology Co., Ltd
Online message
Shenzhen Gaorunxin Technology Co., Ltd
