FM33LE013A FMSH 64KB Flash 16KB RAM Low-Power MCU QFN32

The FMSH FM33LE013A is a low-power mcu that runs from 1.8V~5.5V over -40℃~+125℃. It carries 64KB of Flash and 16KB of RAM. The package is QFN32.

Key Specifications

Design Notes

• Low-power MCUs spend most of their life in sleep. Compare the datasheet current figures in the modes you actually use — active, sleep, and RTC-only — rather than the headline number.
• Flash and RAM figures are the on-chip totals. The LCD segment buffer and any bootloader consume part of the RAM, so confirm the usable remainder against your firmware.
• ISO 7816 channels are driven from the same pin group as the UARTs on some parts. Check the pin-out table before assuming all channels are simultaneously available.
• Operating voltage range matters at both ends: the low end sets the battery cut-off, the high end decides whether the part survives a programming supply or a failing cell stack.

Common Questions

How much program memory is available?

64KB of on-chip Flash, with 16KB of 16KB. Part of the 16KB is reserved for the LCD buffer and the bootloader, so confirm the remainder against the firmware image.

What is the operating voltage range?

1.8V~5.5V. The low end sets the battery cut-off point; the high end covers programming and transient conditions.

How many serial channels does it have?

1. Check the pin-out table for channels that share pins with the ISO 7816 interface before allocating them in firmware.

What is the operating temperature range?

-40℃~+125℃, which covers outdoor meter enclosures without additional heating.