GMA-2-R 2 A 250 Vac Fast-Acting Glass Cartridge Fuse
GMA-2-R 2 A 250 Vac Fast-Acting Glass Cartridge Fuse

GMA-2-R 2 A 250 Vac Fast-Acting Glass Cartridge Fuse

Share
pEaton GMA-2-R — 2 A, 250 V, fast-acting glass cartridge fuse, 100 A at 250 Vac; 10,000 A at 125 Vac interrupting./p
    • Product Details
    • Download

    GMA-2-R 2 A 250 Vac Fast-Acting Glass Cartridge Fuse

    The GMA-2-R from the maker carries 2 A, rated 250 Vac, uses a fast-acting element, in a glass body.

    Technical Data

    ParameterRating
    Part numberGMA-2-R
    Voltage rating250 Vac
    BodyGlass tube, 5 x 20 mm
    Typical melting I2t3.1 A²s
    Typical DC cold resistance0.066 Ω
    Maximum voltage drop250 mV
    Rated current2 A
    Elementsingle element
    End capssilver-plated brass 63-315 mA, nickel-plated 500 mA-15 A
    AC interrupting rating100 A at 250 Vac; 10,000 A at 125 Vac
    Design standardUL/CSA 248-14

    Practical Notes

    • Interrupting capability is 100 A at 250 Vac; 10,000 A at 125 Vac — confirm the circuit's prospective fault current stays below this.
    • Fast element suits resistive and semiconductor loads rather than motors with high inrush.
    • Because it opens within milliseconds, downstream semiconductors see less let-through energy.
    • Glass body lets you inspect the element after a fault.
    • Best kept for lower fault-current circuits where visual diagnosis matters.
    • Working voltage must stay at or below 250 Vac; a lower-rated part is not a safe substitute.
    • Do not upsize beyond 2 A to stop nuisance trips — fix the cause instead.

    Application Scenarios

    Common installation contexts include:

    • EV
    • surge

    Questions and Answers

    What are the ratings of the GMA-2-R?

    2 A continuous at 250 Vac, interrupting rating 100 A at 250 Vac; 10,000 A at 125 Vac.

    Is the GMA-2-R fast-acting or time-delay?

    It is fast-acting. Expect it to open quickly on overload.

    Can the GMA-2-R be used on a higher fault-current circuit?

    No — its interrupting rating is 100 A at 250 Vac; 10,000 A at 125 Vac. Choose a part whose breaking capacity exceeds the prospective fault current.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message