GMC-500-R Eaton 500 mA Medium Delay Glass Fuse 250 Vac
GMC-500-R Eaton 500 mA Medium Delay Glass Fuse 250 Vac

GMC-500-R Eaton 500 mA Medium Delay Glass Fuse 250 Vac

Share
pEaton GMC-500-R — 500 mA, 250 V, glass cartridge fuse, 35 A at 250 Vac; 10,000 A at 125 Vac interrupting./p
    • Product Details
    • Download

    GMC-500-R Eaton 500 mA Medium Delay Glass Fuse 250 Vac

    GMC-500-R Eaton 500 mA Medium Delay Glass Fuse 250 Vac belongs to the the maker range. It carries 500 mA, rated 250 Vac, uses a time-delay element, in a glass body.

    Technical Data

    ParameterRating
    Part numberGMC-500-R
    Voltage rating250 Vac
    Elementsingle element
    AC interrupting rating35 A at 250 Vac; 10,000 A at 125 Vac
    Typical melting I2t0.41 A²s
    BodyGlass tube, 5 x 20 mm
    End capsnickel-plated brass
    Design standardUL/CSA 248-14
    Typical DC cold resistance0.335 Ω
    Rated current500 mA (1/2 A)
    Maximum voltage drop370 mV

    Design Notes

    • Interrupting capability is 35 A at 250 Vac; 10,000 A at 125 Vac — confirm the circuit's prospective fault current stays below this.
    • Time-delay element rides through motor starting and capacitive inrush without nuisance opening.
    • Startup surges of several times rated current are tolerated for a short window.
    • Glass body lets you inspect the element after a fault.
    • Best kept for lower fault-current circuits where visual diagnosis matters.
    • Working voltage must stay at or below 250 Vac; a lower-rated part is not a safe substitute.
    • Do not upsize beyond 500 mA to stop nuisance trips — fix the cause instead.

    Where It Is Used

    Typical places this fuse turns up:

    • EV
    • power supply
    • adapter
    • surge
    • transformer

    Common Questions

    What are the ratings of the GMC-500-R?

    500 mA continuous at 250 Vac, interrupting rating 35 A at 250 Vac; 10,000 A at 125 Vac.

    Is the GMC-500-R fast-acting or time-delay?

    It is time-delay. It tolerates short inrush surges.

    Can the GMC-500-R be used on a higher fault-current circuit?

    No — its interrupting rating is 35 A at 250 Vac; 10,000 A at 125 Vac. Choose a part whose breaking capacity exceeds the prospective fault current.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message