MP2305 4.75-23V, 2A, 340kHz Synchronous Rectified Step-Down Converter NOT RECOMMENDED FOR NEW SOIC
MP2305 4.75-23V, 2A, 340kHz Synchronous Rectified Step-Down Converter NOT RECOMMENDED FOR NEW SOIC

MP2305 4.75-23V, 2A, 340kHz Synchronous Rectified Step-Down Converter NOT RECOMMENDED FOR NEW SOIC

Share
pMPS MP2305 — Synchronous Rectified Step-Down Converter NOT RECOMMENDED FOR NEW, 4.75-23V input, 2 A output, SOIC./p
    • Product Details
    • Download

    MP2305 4.75-23V, 2A, 340kHz Synchronous Rectified Step-Down Converter NOT RECOMMENDED FOR NEW SOIC

    The MPS MP2305 is a Synchronous Rectified Step-Down Converter NOT RECOMMENDED FOR NEW. It operates from a 4.75 V to 23 V input, is rated for 2 A and switches at 340 kHz. It is supplied in a SOIC package.

    Key Specifications

    Part NumberMP2305
    FunctionSynchronous Rectified Step-Down Converter NOT RECOMMENDED FOR NEW
    Input Voltage4.75 V to 23 V
    Current Rating2 A
    Switching Frequency340 kHz
    Peak Efficiency93%
    PackageSOIC
    LifecycleNRFND
    Ordering CodesMP2305

    Features

    • 2A Output Current
    • Wide 4.75V to 23V Operating Input Range
    • Integrated 130mΩ Power MOSFET Switches
    • Output Adjustable from 0.923V to 20V
    • Up to 93% Efficiency
    • Programmable Soft-Start
    • Stable with Low ESR Ceramic Output Capacitors
    • Fixed 340kHz Frequency
    • Cycle-by-Cycle Over Current Protection
    • Input Under Voltage Lockout

    Typical Application Circuit

    MP2305 typical application circuit
    MP2305 typical application circuit, as published in the MPS datasheet.

    Applications

    • Distributed Power Systems
    • Networking Systems
    • FPGA, DSP, ASIC Power Supplies
    • Green Electronics/ Appliances

    Design Notes

    • Size the inductor for the ripple current at the actual switching frequency, typically 30% of the DC load — not for the DC rating alone.
    • The hot loop from input capacitor through the switch to ground sets conducted EMI. Keep that copper area as small as the layout allows.
    • Output ripple is set by the capacitor ESR and its DC-bias derating; a 10 µF ceramic often behaves like 4 µF at the rated output voltage.
    • Route the feedback divider from the output capacitor terminals, away from the switch node.

    Common Questions

    What input voltage does the MP2305 support?
    4.75 V to 23 V. The rated output is 2 A.
    Which package and ordering codes apply to the MP2305?
    SOIC; order codes include MP2305.
    What are the defining features of the MP2305?
    2A Output Current Wide 4.75V to 23V Operating Input Range

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message