Welcome to our company!
MP5001 5V, 1A- 5A Programmable Current Limit Switch QFN10
Share
pMPS MP5001 — 5V, 1A- 5A Programmable Current Limit Switch, 5 A output, QFN10./p
- Product Details
- Download
MP5001 5V, 1A- 5A Programmable Current Limit Switch QFN10
The MPS MP5001 is a 5V, 1A- 5A Programmable Current Limit Switch. It is rated for 5 A. It is supplied in a QFN10 package.
The MP5001 is a protection device designed to protect circuitry on the output (source) from transients on input (VCC).
Key Specifications
| Part Number | MP5001 |
| Function | 5V, 1A- 5A Programmable Current Limit Switch |
| Current Rating | 5 A |
| Package | QFN10 |
| Ordering Codes | MP5001 |
Features
- Integrated 44mΩ Power FET withstand 20V
- Enable/Fault Pin
- Adjustable Slew Rate for Output Voltage
- Adjustable Current Limit
- Thermal Protection
- Over Voltage Limit
Typical Application Circuit
Applications
- Hot Swap
- PC Cards
- Cell Phones
Design Notes
- The current-limit threshold must stay inside the SOA of the pass device at the applied voltage, including startup inrush.
- Hot-swap inrush control is set by the slew rate on the gate or the dV/dt capacitor — too fast trips the upstream supply.
- Reverse-current blocking behaviour differs between ideal-diode and load-switch topologies; pick the one that matches the fault you are protecting against.
- Route the fault flag to a pin the firmware actually polls; a latch-off protection with no report looks like a dead board in the field.
Common Questions
Which package and ordering codes apply to the MP5001?
QFN10; order codes include MP5001.
What are the defining features of the MP5001?
Integrated 44mΩ Power FET withstand 20V Enable/Fault Pin
Shenzhen Gaorunxin Technology Co., Ltd
Online message
Shenzhen Gaorunxin Technology Co., Ltd
