MP62261 2.7-5.5V Single-Channel 2A Current-Limited Power Distribution Switch SOIC8

Product

MP62261 2.7-5.5V Single-Channel 2A Current-Limited Power Distribution Switch SOIC8

Share

pMPS MP62261 — Single-Channel 2A Current-Limited Power Distribution Switch, 2.7-5.5V input, 2 A output, SOIC8./p

[email protected]

MPS SOIC8 Power Management Analog ICs

Product Details
Download

MP62261 2.7-5.5V Single-Channel 2A Current-Limited Power Distribution Switch SOIC8

The MPS MP62261 is a Single-Channel 2A Current-Limited Power Distribution Switch. It operates from a 2.7 V to 5.5 V input and is rated for 2 A. It is supplied in a SOIC8 package.

The MP62260/MP62261 Power Distribution Switch features internal current limiting to prevent damage to host devices due to faulty load conditions.

Key Specifications

Part Number	MP62261
Function	Single-Channel 2A Current-Limited Power Distribution Switch
Input Voltage	2.7 V to 5.5 V
Current Rating	2 A
Quiescent Current	90 µA
Package	SOIC8
Ordering Codes	MP62261

Features

2A Continuous Current
3A accurate Current Limit
2.7V to 5.5V Supply Range
90μA Quiescent Current
50mΩ MOSFET
Thermal-Shutdown Protection
Under-Voltage Lockout
8ms FLAG Deglitch Time
No FLAG Glitch During Power Up
Reverse Current Blocking

Typical Application Circuit

Applications

Smartphone and PDA
Portable GPS Device
Notebook PC
Set-top-box
Telecom and Network Systems
PC Card Hot Swap
USB Power Distribution "MPS" and "The Future of Analog IC Technology" are Registered Trademarks of Monolithic Power Systems, Inc.

Design Notes

Check the input common-mode range against the actual signal, especially in single-supply rails where ground-referenced signals sit at the edge.
Capacitive load drives stability; add series isolation when driving cables or ADC inputs directly.
Offset voltage and its drift, not gain bandwidth, usually set the achievable accuracy in DC instrumentation.
Decouple at the pin with the smallest package capacitor that meets the transient requirement, returned to a local ground.