Welcome to our company!
MP6611 2.7-32V 32V 7A H-bridge DC Motor Driver PRELIMINARY SPECIFICATIONS SUBJECT TO QFN-20
Share
pMPS MP6611 — 32V 7A H-bridge DC Motor Driver PRELIMINARY SPECIFICATIONS SUBJECT TO, 2.7-32V input, 7 A output, QFN-20./p
- Product Details
- Download
MP6611 2.7-32V 32V 7A H-bridge DC Motor Driver PRELIMINARY SPECIFICATIONS SUBJECT TO QFN-20
The MPS MP6611 is a 32V 7A H-bridge DC Motor Driver PRELIMINARY SPECIFICATIONS SUBJECT TO. It operates from a 2.7 V to 32 V input and is rated for 7 A. It is supplied in a QFN-20 package.
The MP6611 is an H-bridge motor driver used for driving reversible motors, which can drive two solenoids or valves, one dc motor or one winding of a stepper motor or other Loads.
Key Specifications
| Part Number | MP6611 |
| Function | 32V 7A H-bridge DC Motor Driver PRELIMINARY SPECIFICATIONS SUBJECT TO |
| Input Voltage | 2.7 V to 32 V |
| Current Rating | 7 A |
| Interface | PWM |
| Package | QFN-20 |
| Ordering Codes | MP6611 |
Features
- 2.7V to 32V Operating Supply Voltage
- Internal Full H-Bridge Driver support 100% duty cycle
- Internal current-sensing and Programmable Cycle-by-cycle Current Regulation
- Low On Resistance (HS+LS: 40mΩ)
- Up to 7A Output Peak Current
- Serial Control interface
- MODE selection: set input PWM/DIR, IN1/IN2, Independent-PWM, Parallel
- 3.3V and 5V Compatible Logic Supply
- Controlled Slew Rate
- Programmable charge pump frequency
Typical Application Circuit
Applications
- DC Brush Motor Drivers
- Solenoid Drivers
Design Notes
- Set dead time to match the external FET turn-off, not the datasheet typical. Too little risks shoot-through, too much distorts the current waveform at low duty cycle.
- Use a Kelvin connection for the current-sense resistor; shared copper injects switching noise straight into the sense amplifier.
- The thermal pad is the only heat path for most packages — via-stitch it to a ground plane with at least 9 vias.
- PWM frequency trades switching loss against current ripple in the motor inductance; 20 kHz keeps the drive out of the audible band.
- Add a brake or coast path so regeneration during a fast stop does not pump the supply rail.
Common Questions
What input voltage does the MP6611 support?
2.7 V to 32 V. The rated output is 7 A.
Which package and ordering codes apply to the MP6611?
QFN-20; order codes include MP6611.
What are the defining features of the MP6611?
2.7V to 32V Operating Supply Voltage Internal Full H-Bridge Driver support 100% duty cycle
Shenzhen Gaorunxin Technology Co., Ltd
Online message
Shenzhen Gaorunxin Technology Co., Ltd
