Welcome to our company!
MPQ6527-AEC1 5.5-40V 40V, 0.8A, 10-Channel Half-Bridge Motor Driver TSSOP-28
Share
pMPS MPQ6527-AEC1 — 40V, 0.8A, 10-Channel Half-Bridge Motor Driver, 5.5-40V input, 0.8 A output, 10 channels, TSSOP-28, AEC-Q100./p
- Product Details
- Download
MPQ6527-AEC1 5.5-40V 40V, 0.8A, 10-Channel Half-Bridge Motor Driver TSSOP-28
The MPS MPQ6527-AEC1 is a 40V, 0.8A, 10-Channel Half-Bridge Motor Driver. It operates from a 5.5 V to 40 V input and is rated for 0.8 A. It is supplied in a TSSOP-28 package. The part is AEC-Q100 qualified.
The MPQ6527 is a ten-channel half-bridge DMOS output driver with integrated power MOSFETs.
Key Specifications
| Part Number | MPQ6527-AEC1 |
| Function | 40V, 0.8A, 10-Channel Half-Bridge Motor Driver |
| Input Voltage | 5.5 V to 40 V |
| Current Rating | 0.8 A |
| Channels | 10 |
| Package | TSSOP-28 |
| Qualification | AEC-Q100 |
| Ordering Codes | MPQ6527-AEC1 |
Features
- Wide 5.5V to 40V Operating Input Range
- High-Side and Low-Side Drivers Connected in Half-Bridge Configurations
- Up to 0.8A Output Current
- RDS(ON) (HS-FET and LS-FET), Typically 1.3Ω
- Very Low Quiescent Current in Standby Mode vs. Total Temperature Range
- Output Short-Circuit Protection (SCP)
- Over-Temperature Protection (OTP) and Pre-Warning
- Under-Voltage (UV) and Over-Voltage Lockout (OVLO)
- Serial Data Interface
- Various Diagnostic Functions: Shorted Output, Open Load, and Over-Temperature, Over-Voltage, and Under-Voltage Conditions
Typical Application Circuit
Applications
- Drive Various Loads in Automotive and Industrial Applications
Design Notes
- Set dead time to match the external FET turn-off, not the datasheet typical. Too little risks shoot-through, too much distorts the current waveform at low duty cycle.
- Use a Kelvin connection for the current-sense resistor; shared copper injects switching noise straight into the sense amplifier.
- The thermal pad is the only heat path for most packages — via-stitch it to a ground plane with at least 9 vias.
- PWM frequency trades switching loss against current ripple in the motor inductance; 20 kHz keeps the drive out of the audible band.
- Add a brake or coast path so regeneration during a fast stop does not pump the supply rail.
Common Questions
What input voltage does the MPQ6527-AEC1 support?
5.5 V to 40 V. The rated output is 0.8 A.
Which package and ordering codes apply to the MPQ6527-AEC1?
TSSOP-28; order codes include MPQ6527-AEC1.
What are the defining features of the MPQ6527-AEC1?
Wide 5.5V to 40V Operating Input Range High-Side and Low-Side Drivers Connected in Half-Bridge Configurations
Is the MPQ6527-AEC1 qualified for automotive designs?
Yes — it is AEC-Q100 qualified. Confirm the grade against the qualification summary in the datasheet before specifying it on a safety-related rail.
Shenzhen Gaorunxin Technology Co., Ltd
Online message
Shenzhen Gaorunxin Technology Co., Ltd
