Welcome to our company!
MPQ6626-AEC1 5.5-40V, 0.8A Hex Half-Bridge Motor Driver TSSOP-28
Share
pMPS MPQ6626-AEC1 — Hex Half-Bridge Motor Driver, 5.5-40V input, 0.8 A output, TSSOP-28, AEC-Q100./p
- Product Details
- Download
MPQ6626-AEC1 5.5-40V, 0.8A Hex Half-Bridge Motor Driver TSSOP-28
The MPS MPQ6626-AEC1 is a Hex Half-Bridge Motor Driver. It operates from a 5.5 V to 40 V input and is rated for 0.8 A. It is supplied in a TSSOP-28 package. The part is AEC-Q100 qualified.
The MPQ6626 is a 6-channel half-bridge DMOS output driver with integrated power MOSFETs.
Key Specifications
| Part Number | MPQ6626-AEC1 |
| Function | Hex Half-Bridge Motor Driver |
| Input Voltage | 5.5 V to 40 V |
| Current Rating | 0.8 A |
| Package | TSSOP-28 |
| Qualification | AEC-Q100 |
| Ordering Codes | MPQ6626-AEC1 |
Features
- Wide 5.5V to 40V Operating Input Range
- High-Side and Low-Side Drivers Connected in Half-Bridge Configurations
- Up to 0.8A Output Current
- Typical 1.3Ω RDS(ON) (HS + LS)
- Very Low Quiescent Current in Standby Mode versus Total Temperature Range
- Outputs are Short-Circuit Protected
- Over-Temperature Protection and Pre- Warning
- Under-Voltage Lockout (UVLO) and Over- Voltage Lockout (OVLO)
- Serial Data Interface
- Diagnostic Functions Include: Shorted Output, Open Load, Over-Temperature (OT), Over-Voltage (OV), and Under- Voltage (UV)
Typical Application Circuit
Applications
- Automotive and Industrial Applications
Design Notes
- Set dead time to match the external FET turn-off, not the datasheet typical. Too little risks shoot-through, too much distorts the current waveform at low duty cycle.
- Use a Kelvin connection for the current-sense resistor; shared copper injects switching noise straight into the sense amplifier.
- The thermal pad is the only heat path for most packages — via-stitch it to a ground plane with at least 9 vias.
- PWM frequency trades switching loss against current ripple in the motor inductance; 20 kHz keeps the drive out of the audible band.
- Add a brake or coast path so regeneration during a fast stop does not pump the supply rail.
Common Questions
What input voltage does the MPQ6626-AEC1 support?
5.5 V to 40 V. The rated output is 0.8 A.
Which package and ordering codes apply to the MPQ6626-AEC1?
TSSOP-28; order codes include MPQ6626-AEC1.
What are the defining features of the MPQ6626-AEC1?
Wide 5.5V to 40V Operating Input Range High-Side and Low-Side Drivers Connected in Half-Bridge Configurations
Is the MPQ6626-AEC1 qualified for automotive designs?
Yes — it is AEC-Q100 qualified. Confirm the grade against the qualification summary in the datasheet before specifying it on a safety-related rail.
Shenzhen Gaorunxin Technology Co., Ltd
Online message
Shenzhen Gaorunxin Technology Co., Ltd
