MV055F1DAX20E Eaton Bussmann 5.5kV 20A Class E Medium Voltage Fuse
MV055F1DAX20E Eaton Bussmann 5.5kV 20A Class E Medium Voltage Fuse

MV055F1DAX20E Eaton Bussmann 5.5kV 20A Class E Medium Voltage Fuse

Share
pEaton Bussmann MV055F1DAX20E, 5.5kV 20A Class E medium voltage fuse, 50 kAIC interrupting. For transformer, feeder and switchgear protection./p
    • Product Details
    • Download

    MV055F1DAX20E Eaton Bussmann 5.5kV 20A Class E Medium Voltage Fuse

    At a Glance
    • 5.5 kV rated voltage, 20 A rated current
    • 50 kAIC interrupting rating
    • Class E time-current characteristic
    • Silver ribbon element

    The Eaton Bussmann MV055F1DAX20E is a medium voltage fuse with 5.5 kV rated voltage, 20 A rated current, 50 kAIC interrupting capacity, carrying a Class E time-current characteristic. Construction is 1 barrel, a fiberglass tube, non indicating.

    Specifications

    General specifications
    UPC051712269599
    Product Length/Depth3 in
    Product Height15.86 in
    Product Width3 in
    Product Weight8.4 lb
    Electrical rating
    Amperage Rating20 A
    Interrupt rating50 kAIC
    Voltage rating5.5 kV
    Physical details
    MaterialFiberglass tube
    Packaging typeStandard
    General information
    Barrels1
    ClassClass E
    ConnectionFerrule end x ferrule end
    ElementSilver ribbon
    Fuse indicatorNon Indicating

    Series Selection Table

    MV055F1DAX20E series selection table
    Ampere ratings, dimensions and catalog numbers across the Medium Voltage Fuse family, reproduced from the Eaton Bussmann datasheet.

    Applications

    • Energy and utility distribution
    • Industrial equipment
    • Transformer protection

    Selection Notes

    • Select against the available fault current at the installation point, not the load current — the interrupting rating has to exceed it with margin.
    • E-rated fuses follow a defined melting curve; pairing them with non-E-rated devices in the same feeder breaks coordination.
    • Termination: Ferrule end x ferrule end. Confirm the mating clip or busbar before ordering; ferrule and blade ends are not interchangeable.

    Common Questions

    What are the ratings of the Eaton Bussmann MV055F1DAX20E?
    5.5 kV / 20 A, with a 50 kAIC interrupting rating.
    How much fault current can the MV055F1DAX20E interrupt?
    50 kAIC. The available fault current at the installation point must not exceed this value.
    What does Class E mean for the MV055F1DAX20E?
    Class E defines the fuse's time-current characteristic. E-rated fuses carry a defined melting curve so they coordinate predictably with upstream and downstream devices; mixing E and non-E ratings in one feeder defeats that coordination.
    How does the MV055F1DAX20E connect?
    Ferrule end x ferrule end. Confirm the mating clip, holder or busbar before ordering — ferrule and blade ends are not interchangeable.
    How should I select the MV055F1DAX20E for a circuit?
    Match the voltage rating to the system voltage, keep the continuous current above the load current, and check that the interrupting rating exceeds the available fault current. In medium voltage work, select on the transformer or feeder fault level rather than the load current alone.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message